asbclogr.gif (5107 bytes)

Albany Steel & Brass Corporation
SUCCESSORS TO LEBOVITZ BROTHERS
red.gif (38700 bytes)
DISTRIBUTORS OF FASTENERS AND INDUSTRIAL SUPPLIES
SINCE 1918
red.gif (38700 bytes)
1900 W. GRAND AVE.     CHICAGO, ILLINOIS  60622
PHONE: 312-733-1900                 FAX: 312-733-9887
ISO 9001:2008

Click here for our Current Specials!

AlbanyLineCard.gif (467005 bytes)

you_tube_0.png (3111 bytes)

Click here for Overstock Specials

Home Up

Anchors - Concrete, Wall Board, Drywall, Masonry, Toggle Bolts, Dropin Bolts- Cap Screws, Carriage, Dowel, Elevaor, Hex, Lag Screw, Plow, Structural, Tap Forged Hardware- Eye Bolts, Eye Nuts, Turnbuckles Inserts- Concrete, Knurled, Wood Nuts- Acorn, Castle, Coupling, Finish Hex, Jam, Locknuts, Heavy Hex, Keps, Nylon Stop, Square, Wing Rivets- Non-Stuctural, Closed End, Structural Self Plugging, Monobolts Screws- Deck, Dowel, Type U, Type 21, Drywall, Knurled, One-Way, Particle Board, Self Piercing, Self Drilling, Teks, Thumbscrews Threaded Rod- Fine Thread, Course Thread, Brass, Stainless Washers- Bevel, Bonded, Countersunk, Fender, Finishing, Flat, SAE, Locking, Malleable, Ogee, Rubber, Structural, Wave

Nuts     

NUT TYPE

Made of

SIZE RANGE

GENERAL INFORMATION

Acorn - High Crown

Steel

6-32 to 1-1/4"-7

Closed end two piece construction

Acorn - Low Crown

Steel

4-40 to 1-1/2"

Closed end two piece construction

Castle Nut

Carbon Steel

1/4"-28 to 2"-12

Fine (UNF) - Class 2B Threads

Coupling Nut

Steel

10-24 x 3/4" to 2" x 4-1/2"

Use with: Stud anchors and threaded rod.

Finished Hex Jam Nut

Carbon Steel

1/4"-20 to 3"-4,1/4"-28 to 3"-12

Coarse (UNC) & Fine (UNF) - Class 2B threads.

Finished Hex Nut

Carbon Steel

1/4"-20 to 3"-4,1/4"-28 to 3"-12

Coarse (UNC) & Fine (UNF) - Class 2B threads.

Finished Hex Nut - Slotted

Carbon Steel

1/4"-20 to 3"-4,1/4"-28 to 3"-12

Coarse (UNC) & Fine (UNF) - Class 2B threads.

Flexloc Locknuts

Steel

1/4" to 2"

The severe service locknut. One-Piece, all-metal. Full size hex for maximum strength and wrenchablity.

Heavy Hex Jam Nut

Carbon Steel

1/4"-20 to 4"-4

Tapped UN Coarse Threads only. Double Chamfered or Washer Faced

Heavy Hex Nut

Carbon Steel

1/4"-20 to 4"-4

Tapped UN Coarse Threads only. Double Chamfered or Washer Faced

Heavy Hex Nut - Slotted

Carbon Steel

1/4"-20 to 4"-4

Tapped UN Coarse Threads only. Double Chamfered or Washer Faced

Keps

Nut-Carbon Steel, Washer-Steel Heat Treated

4-40 to 3/8"-16

Preassembled nuts and lock washers.

Machine Screw

Steel

2-56 to 3/8"-16

Hexagon or square

Nylon Stop Nuts - NM-NE

Steel With Nylon insert

2-56 to 1-1/2"-6, 2-64 to 1-1/2"-12

Standard Hex Nylon Insert Locknut

Nylon Stop Nuts - NTM-NTE

Steel With Nylon insert

2-56 to 1-1/2"-6, 6-40 to 1-1/2"-12

Thin Standard Hex Nylon Insert Locknut

Nylon Stop Nuts - NTU

Steel With Nylon insert

1/4"-20 to 3"-4, 7/16"-20 TO 3"-12

Heavy Hex Nylon Insert Locknut

Nylon Stop Nuts - NU

Steel With Nylon insert

1/4"-20 to 3"-4, 5/8"-18 TO 3"-12

Heavy Thin Hex Nylon Insert Locknut

Square

Carbon Steel, Grade 5

1/4"-20 to 1-1/2"-6

Tapped UN Coarse Threads only.

Wing Nuts

Malleable iron or brass

#4 to 3/4"

Recommended for general applications on products that require adjustments in the field. They are perfectly balanced in design with ample surfaces on wingspread and base area.